WD20SMZM 2TB 2.5" with USB-C interface

[QWACDRS]

Hi Everyone,

Does Dolphin have a compatible sata board for a WD20SMZM 2TB 2.5" with a USB-C interface?

I need to convert to sata to interrogate the drive further.

I may need to email support with pictures as well, but i thought I'd try on here first. I have the WD kit with compatible sata's as well.

[diag4711]

Hi,

here you can buy a unlocked SATA PCB.

https://www.hddheadtools.com/product/com...60-800067/

You need this unlocked SATA-PCB -> 2060-800065

[QWACDRS]

Hi,

here you can buy a unlocked SATA PCB.

https://www.hddheadtools.com/product/com...60-800067/

You need this unlocked SATA-PCB -> 2060-800065

Thank you very much for this.

I just found this now that you have put me onto the right path.

https://www.dolphindatalab.com/product/c...60-800067/

[diag4711]

yes its the same.
You must re-solder the chip, or you use the pin reader.