+- Dolphin Data Lab Forums (https://forum.dolphindatalab.com)
+-- Forum: General Forums (https://forum.dolphindatalab.com/forum-1.html)
+--- Forum: Data Recovery News-Public Access (https://forum.dolphindatalab.com/forum-2.html)
+--- Thread: WD20SMZM 2TB 2.5" with USB-C interface (/thread-4102.html)
WD20SMZM 2TB 2.5" with USB-C interface - QWACDRS - 07-01-2021
Hi Everyone,
Does Dolphin have a compatible sata board for a WD20SMZM 2TB 2.5" with a USB-C interface?
I need to convert to sata to interrogate the drive further.
I may need to email support with pictures as well, but i thought I'd try on here first. I have the WD kit with compatible sata's as well.
RE: WD20SMZM 2TB 2.5" with USB-C interface - diag4711 - 07-01-2021
Hi,
here you can buy a unlocked SATA PCB.
https://www.hddheadtools.com/product/compatible-data-recovery-sata-pcb-2060-800065-for-wd-usb-pcb-2060-800067/
You need this unlocked SATA-PCB -> 2060-800065
RE: WD20SMZM 2TB 2.5" with USB-C interface - QWACDRS - 07-01-2021
(07-01-2021, 05:03 PM)diag4711 Wrote: Hi,
here you can buy a unlocked SATA PCB.
https://www.hddheadtools.com/product/compatible-data-recovery-sata-pcb-2060-800065-for-wd-usb-pcb-2060-800067/
You need this unlocked SATA-PCB -> 2060-800065
Thank you very much for this.
I just found this now that you have put me onto the right path.
https://www.dolphindatalab.com/product/compatible-data-recovery-sata-pcb-2060-800065-for-wd-usb-pcb-2060-800067/
RE: WD20SMZM 2TB 2.5" with USB-C interface - diag4711 - 07-01-2021
yes its the same.
You must re-solder the chip, or you use the pin reader.