New Upgrades Of All DFL Data Recovery Tools Are Available

[Dolphin999]

Dolohin team keeps working hard to improve all existing DFL hdd firmware repair tools and data recovery tools and at the same time more and more new functions are added to handle new data recovery cases.

What’re the new updates of DFL tools?

DFL-Cpanel V1.1
1, Full modes optimization and compatible with more USB interfaces of different chip sets;
2, Admin rights integrated properly to make sure users can use the control panel properly. Control panel supports SRP, FRP so far;

SRP-DE/DDP/DE V1.55 New
1, hex editing within file extraction interface is corrected and  SATA 1, PATA write error bug is fixed;
2, independent channel reading algorithm is optimized;
3, manual bad sector skip during imaging is added;
4, bad sector scanning is optimized and users get more accurate scanning result;
5, Toshiba Glist clearing and virtual translator fix are optimized;
6, LBA display is optimized to show the live LBA.

DFL Seagate V1.54 New
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, ROM read/write is optimized.

DFL WD V2.69 New
1, Compatible with WDII hardware;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;

DFL-Hitachi/IBM New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, DK family(very old IDE drives) is added to support;
3, More families are added to support;
4, Full modes optimization and compatible with more USB interfaces of different chip sets;
5, Auto family recognizition is added even when the drive is not detected;
6, DVR hdd unlocking function is added;
7, Virtual translator fix optimization for 2.5″ drives’
8, Virtual translator fix is added for 3.5″ drives.

DFL-Toshiba/Fujitsu New V1.2
1, More Fujitus families are added to support;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;

DFL-Samsung New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, Samsung USB hdd is added to support by connecting to pc;
4, Module writing optimization;
5, More families are added to support.

After all DFL tools work greatly, DFL has planned many new functions to fix some complicated data recovery cases and Dolphin engineers are adding them to the DFL-SRP USB3.0 equipment and users will get them soon.

[pclab]

Good work.
Thanks

[Amarbir[CDR-Labs]]

Hello Team ,
Thank You .I would Be Posting In The VIP Section Of The Same Post With More Appreciations And My Views

[pclab]

The bug on WD, of the "Task is running" message still continues...
Can't shutdown the app without being done by ctrl+alt+del....

[LarrySabo]

Wow, thanks! DFL Team has been very busy! Thank you for all your work and dedication to improving the products. Like Amarbir, I also replied in the users-only forum. (This post is in the public access form, of course.)

[Amarbir[CDR-Labs]]

The bug on WD, of the "Task is running" message still continues...
Can't shutdown the app without being done by ctrl+alt+del....

PCLAb ,
     Can You Please Tell Me What Tool You Have DFL WD-II FRP  ? .

[pclab]

Hi Amarbir

I have SRP, with WD and ST activated.

[Amarbir[CDR-Labs]]

Hi Amarbir

I have SRP, with WD and ST activated.

Aha ,
 Also DDP Is Activated ?

[pclab]

No, only WD and ST

[Amarbir[CDR-Labs]]

No, only WD and ST

Alright ,
       Good to know that i have ddp + all modules activated

[pcdiag]

Good job

[h_d5000]

were the link?

[ecuadatarecovery]

were the link?

Page 1 friend

[LarrySabo]

were the link?

It's in the first post of this thread: http://forum.dolphindatalab.com/thread-2276.html.

[Jignesh]

The bug on WD, of the "Task is running" message still continues...
Can't shutdown the app without being done by ctrl+alt+del....

Dear Friend Pclab.

you need to stop first ur running process by STOP Button and then u need to use Exit botton to go to home screen.
on the top panel there is back button that is for close the utility menu and go to home @ back.
may be u dont know about it so u think this is the bug.
if you have this issue just follow what i tell and ur issue resolved.
generaly we make hebit like when we want to close utility and back to home we use X to back to home but in the new versions u need to stop running process and then use back button that is available on top panel.

Yours Friend
Jignesh Pankhania.