07-08-2015, 06:40 PM
(This post was last modified: 07-08-2015, 06:41 PM by Dolphin999.)
Dolohin team keeps working hard to improve all existing DFL hdd firmware repair tools and data recovery tools and at the same time more and more new functions are added to handle new data recovery cases.
What’re the new updates of DFL tools?
DFL-Cpanel V1.1
1, Full modes optimization and compatible with more USB interfaces of different chip sets;
2, Admin rights integrated properly to make sure users can use the control panel properly. Control panel supports SRP, FRP so far;
SRP-DE/DDP/DE V1.55 New
1, hex editing within file extraction interface is corrected and SATA 1, PATA write error bug is fixed;
2, independent channel reading algorithm is optimized;
3, manual bad sector skip during imaging is added;
4, bad sector scanning is optimized and users get more accurate scanning result;
5, Toshiba Glist clearing and virtual translator fix are optimized;
6, LBA display is optimized to show the live LBA.
DFL Seagate V1.54 New
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, ROM read/write is optimized.
DFL WD V2.69 New
1, Compatible with WDII hardware;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;
DFL-Hitachi/IBM New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, DK family(very old IDE drives) is added to support;
3, More families are added to support;
4, Full modes optimization and compatible with more USB interfaces of different chip sets;
5, Auto family recognizition is added even when the drive is not detected;
6, DVR hdd unlocking function is added;
7, Virtual translator fix optimization for 2.5″ drives’
8, Virtual translator fix is added for 3.5″ drives.
DFL-Toshiba/Fujitsu New V1.2
1, More Fujitus families are added to support;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;
DFL-Samsung New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, Samsung USB hdd is added to support by connecting to pc;
4, Module writing optimization;
5, More families are added to support.
After all DFL tools work greatly, DFL has planned many new functions to fix some complicated data recovery cases and Dolphin engineers are adding them to the DFL-SRP USB3.0 equipment and users will get them soon.
What’re the new updates of DFL tools?
DFL-Cpanel V1.1
1, Full modes optimization and compatible with more USB interfaces of different chip sets;
2, Admin rights integrated properly to make sure users can use the control panel properly. Control panel supports SRP, FRP so far;
SRP-DE/DDP/DE V1.55 New
1, hex editing within file extraction interface is corrected and SATA 1, PATA write error bug is fixed;
2, independent channel reading algorithm is optimized;
3, manual bad sector skip during imaging is added;
4, bad sector scanning is optimized and users get more accurate scanning result;
5, Toshiba Glist clearing and virtual translator fix are optimized;
6, LBA display is optimized to show the live LBA.
DFL Seagate V1.54 New
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, ROM read/write is optimized.
DFL WD V2.69 New
1, Compatible with WDII hardware;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;
DFL-Hitachi/IBM New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, DK family(very old IDE drives) is added to support;
3, More families are added to support;
4, Full modes optimization and compatible with more USB interfaces of different chip sets;
5, Auto family recognizition is added even when the drive is not detected;
6, DVR hdd unlocking function is added;
7, Virtual translator fix optimization for 2.5″ drives’
8, Virtual translator fix is added for 3.5″ drives.
DFL-Toshiba/Fujitsu New V1.2
1, More Fujitus families are added to support;
2, bad sector scanning is optimized and users get more accurate scanning result;
3, Full modes optimization and compatible with more USB interfaces of different chip sets;
DFL-Samsung New V1.2
1, bad sector scanning is optimized and users get more accurate scanning result;
2, Full modes optimization and compatible with more USB interfaces of different chip sets;
3, Samsung USB hdd is added to support by connecting to pc;
4, Module writing optimization;
5, More families are added to support.
After all DFL tools work greatly, DFL has planned many new functions to fix some complicated data recovery cases and Dolphin engineers are adding them to the DFL-SRP USB3.0 equipment and users will get them soon.
sales@dolphindatalab.com
Dolphin team
Dolphin team