DFL Data Extractor V1.6 Upgrade

[Dolphin999]

Dolphin team always work hard for users' greater success and the following are the new changes:

1.Target drive initialization failure fix;
2.Control Panel optimization, please note the control panel is available for SRP, FRP;
3.Image setting optimization when disabling reverse read, fixing the switching sectors failed to correspond to the setting;

4.Fixing program crash bug when the sectors to skip exceeds overs 2048;
5.Scanning function improvement;
6.New:Cache refresh for source and target drive is added;
7.New:Within the sector view interface, users can compare data any time to see if the data transfered to target drive is exactly the same as the source;
8.Samsung drive password removal optimization;
9.Toshiba hdd virtual translator improvement;
10.Fix the bug after disabling all resets;
11.Raw recovery improvement;
12.New: To handle the target disk error is added.

Users can go to the Dolphin Data Extractor user-only forum to download this new upgrade program.

Dolphin team will release more upgrades in the near future after our National Day Holiday.

[Dolphin999]

Users can now download the upgrade program of DFL data extractor V1.6 here: http://forum.dolphindatalab.com/thread-2411.html

[jinarto@hotmail.com]

Good Very Good

[HddX]

i cant get into the forum

[Dolphin999]

Hello HDDX, that's one is for data recovery, you are using our tools for hdd refurbishing, so you don't need it and we will upload the all in one soon, I have asked our engineers to fix some bugs I have seen in the new version and you will get the new version of firmware repair programs soon. Thank you, my friend.

[HddX]

Hello HDDX, that's one is for data recovery, you are using our tools for hdd refurbishing, so you don't need it and we will upload the all in one soon, I have asked our engineers to fix some bugs I have seen in the new version and you will get the new version of firmware repair programs soon. Thank you, my friend.

ok freind...i will be wait then thanks a lot

[Dolphin999]

hello Friend,
here is the new program of DFL SRP USB3.0 all in one V1.6: http://forum.dolphindatalab.com/thread-2428.html

[diag4711]

hello Friend,
here is the new program of DFL SRP USB3.0 all in one V1.6: http://forum.dolphindatalab.com/thread-2428.html

Thanks for update !

In WD 2.7 - After start i can not choice a USB channnel ? 

is it a bug or where i can choice USB ?

Thanks

[Stanley.Morgan]

Hello friend, when you start the program, you are asked to select SATA 0, SATA 1, PATA and USB.

[diag4711]

Hello friend, when you start the program, you are asked to select SATA 0, SATA 1, PATA and USB.

Hello Stanley,

i have WD II (only 1x SATA + 1x PATA) -> in version 2.6.9 i can select ATA and USB
and in version 2.7.0 i can select only ATA !

[diag4711]

Nobody has the same problem ?
(WD II -> NO USB option by start!)

[hipo]

Same here, only ATA.

[Dolphin999]

Thank you for your feedback, friends, looking into this one.

[Amarbir[CDR-Labs]]

Thank you for your feedback, friends, looking into this one.

Hello Admin ,
      Your Delevelopemt n Team Does Not Look Into Such Issue Before Release .You Are using Live [ Data Recovery Cases And DR Professionals As a Beta Testing Team ] . This is Not Good At All  .Please Sir Sit Down And Have a Meeting .Before You Release a Product Select a Bunch Of Users And Your Staff Who Beta Test Each Version  .Generally Its Not Giving Any Positive Signal To Anyone And We Are Dreading Using Tool On Live Cases  .

[Dolphin999]

WDII, FRP, SRP for WD are different hardware based, WDII is the first generation hardware and we are working hard to be compatible with that hardware. Users with the latest generation of hardware doesn't have this problem at all. We will release beta version and final version later for all new versions and you can select to use beta or not and this might help, thanks.