Guest Join UsHey Guest,
Welcome, Join Dolphin awesome community where you can discuss on various topics :-
You need to be Dolphin user to get one VIP forum account.
You can get latest software upgrade on DFL data recovery tools.
You can get latest data recovery manuals, case studies and tips.
You can seek professional data recovery support from worldwide engineers.
You can get firmware resources for all HDD brands.
You can get donor hdd support from all forum members.
Much More.. or Create an Account


Dolphin National Day Holiday Oct.1-7 2018 Check here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seagate ST2000LM007 Rosewood Unlock Steps and Data Recovery
#1
   

Seagate ST2000LM007 Rosewood hard drives data recovery becomes more and more common in data recovery engineers’ jobs. It is a must for users to have proper Seagate firmware repair tools, Seagate LM Slim hdd head swap tools and data extractor.

In many ST2000LM007 data recovery cases, users need to handle the firmware failures and the most important and difficult part for these drives is to unlock the COM terminal to fix the firmware failure. The following are the unlock steps:

1, Connect the ST2000LM007 patient hdd to DFL-SRP or DFL PCIe hardware and connect the COM port properly;

2, Go to DFL Cpanel, select the channel users have connected the patient hdd to and open the DFL Seagate firmware repair program;


3, Power on the hard drive and wait until the drive gets ready, users can go to COM terminal and check the current status, try to enter F3 T>, type any command, users will get terminal message as ‘Diagnostic Port Locked’, that is to say users need to unlock the COM terminal for further firmware repair;


Please note for step 3: If clicking noises are heard at power startup, users need to find out if it is head issue. Mostly it is head issue if clicking and users must stop power first and then bring the patient drive to clean room for head swap. If the hdd doesn’t spin up at all, users need to find one donor PCB to swap and solder the patient ROM chip or transfer the original ROM to donor PCB. After head swap or PCB swap, continue the steps.

4, Read ROM by COM, remember to select the LM family, users can select a high baud rate for faster ROM backup;

5, Go to ROM Operations>Unlock>Unlock ROM (EX ROM File), users need to select the original ROM path and the unlock ROM path and the DFL Seagate firmware repair program will generate the unlock ROM automatically;


6, Write ROM by COM, remember to select the unlock ROM to write and select the LM to write. After the ROM write completes, power off and on and in COM terminal, we can see message as “Tech Unlock Handshake: 0xXXXXXXXX” and this means the unlock ROM is good;


7, Go to ROM Operations>Unlock>Send Unlock Key, at this time, users can notice the hdd status has changed from Busy to Ready;

8, Go to Common Functions>Status Refresh>Get All>Obtain Details>OK, quit the Status Refresh window;


9, After above steps, the firmware area is accessible and users can enter F3 T> to input commands, can read and write firmware, can edit ID, etc;


10, After fixing the firmware failure, the data area is usually accessible for recovery.

Users can watch the video below on how to unlock the ST2000LM007 Rosewood hard drives and operate on the firmware modules:



Any question is welcome to sales@dolphindatalab.com or add Dolphin Skype ID: dolphin.data.lab

Seagate ST1000LM035 Rosewood Unlock Steps and Data Recovery
Reply
#2
thank you very much
Reply
#3
link please
Reply
#4
(02-07-2018, 11:27 PM)Alhalal555 Wrote: link please

The software is still a beta version, we will release a relatively stable version later, I believe it will not take too much time.But if you want to try this beta version, you can get in touch with us via Skype, our Skype account number is dolphin.data.lab
Reply
#5
Users can download the DFL all in one V1.801 and many Seagate LM unlock and recovery are already supported well, such as ST500LM030, ST1000LM035, ST2000LM007, ST2000LM015, etc.
Reply
#6
(04-28-2018, 01:10 PM)Stanley.Morgan Wrote: Users can download the DFL all in one V1.801 and many Seagate LM unlock and recovery are already supported well, such as ST500LM030, ST1000LM035, ST2000LM007, ST2000LM015, etc.

One question sir if i have not backup the 2b module and regenerated translator the what will be the solution for getting data back.
Reply
#7
Fantastic work Dolphin!
Reply
#8
(04-28-2018, 11:44 PM)shreevinayakbmr Wrote:
(04-28-2018, 01:10 PM)Stanley.Morgan Wrote: Users can download the DFL all in one V1.801 and many Seagate LM unlock and recovery are already supported well, such as ST500LM030, ST1000LM035, ST2000LM007, ST2000LM015, etc.

One question sir if i have not backup the 2b module and regenerated translator the what will be the solution for getting data back.

Until so far, the success rate is not good for these drives, if possible, you can send your drives to us and we will analyze your drive and see but not urgent drives.
Reply
#9
THANKS SIR BUT ITS NOT POSSIBLE send it u sir if there is any solution which i cant try plz send me .
Reply
#10
Has anyone really managed to unlock? all I did did not work.
Reply
#11
(07-20-2018, 01:18 AM)miguel.elizalde Wrote: Has anyone really managed to unlock? all I did did not work.

Yes its 100% working tested many St2000lm007 Drives
Reply
#12
saved all modules, regenerated the translator (m0,6,2,,,,22) but after writing back 2B module the drive goes to cap 0 state
any thing can be done ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

About Dolphin Data Lab Forums

Dolphin support forum is for Dolphin users only to get latest software upgrade, new user manuals, case studies, data recovery solutions and tips on how to use Dolphin data recovery tools properly and for maximum data recovery.

For any more information, please contact us.

              Quick Links

              User Links